4 Different Ways To Tie A Tie 👔

RedRobin

The Simple Tie

Size: 1 our of 5

Symmetry: 4 out of 5

Difficulty: 1 out of 5

4 Different Ways To Tie A Tie πŸ‘”

1. Start with the backside of the tie facing away from you, the wide end is on the right and the small end is on the left. The tip of the small end should rest slightly above your belly-button (this will vary depending on your height and the length & thickness of your tie). Move only the active (wide) end.

2. Wide end under the small end to the left.

3. Across the small end to the right.

4. Up into the neck loop from underneath.

5. Down through the loop you've just made in the front.

6. Pull down on the wide end to tighten. Slide the knot up to adjust.

The Eldredge Knot

Size: 4 out of 5

Symmetry: 2 out of 5

Difficulty: 5 out of 5

4 Different Ways To Tie A Tie πŸ‘”
4 Different Ways To Tie A Tie πŸ‘”

1. Start with the wide end of the tie on the left and the small end on the right. The tip of the wide end should rest at the top of your belt buckle. Only move the active (small) end.

2. Small end over the wide end to the left.

3. Under the wide end and to the right.

4. Up to the center, towards neck loop.

5. Through the neck loop and to the left.

6. Across the front, to the right. Then up into the neck loop from underneath.

7. Down to the left and around the back of the wide end to the right. Keep this part loose.

8. Bring it across the front towards the left and through the loop made in the previous step.

9. Pull the small end towards the left to tighten.

10. Up to the center, towards neck loop. Down through the neck loop and to the left.

11. Up to the center, towards neck loop. Down through the neck loop and to the right. Keep this part loose.

12. Across the front towards the left and through the loop made in the previous step.

13. Pull the small end towards the left to tighten.

14. Tuck the rest of the small end behind neck loop on the left side.

15. Strut your stuff.

Bowtie

Size: 1 out of 5

Symmetry: 3 out of 5

Difficulty: 4 out of 5

4 Different Ways To Tie A Tie πŸ‘”
4 Different Ways To Tie A Tie πŸ‘”

1. Lie the bowtie face up. Adjust the bowtie so right side is shorter than the left. The end on the left will be referred to as A and the end on the right will be referred to as B.

2. Move A to the right side, across B.

3. Bring A under B and up through the neck loop.

4. At the joint, fold B towards the right and then towards the left to create a the bow shape.

5. Bring A straΒ­ight down over the middle of the bow shape that was made with B.

6. Fold A back towards the chest and pinch the fold.

7. Push the pinched end (A) through the loop behind B.

8. Pull on the folded parts of the bow to tighten.

9. Adjust until balanced on both sides.

Windsor Knot

Size: 4 out of 5

Symmetry: 5 out of 5

Difficulty: 2 out of 5

4 Different Ways To Tie A Tie πŸ‘”

1. Start with the wide end of the tie on the right and the small end on the left. The tip of the small end should rest slightly above your belly-button (this will vary depending on your height and the length & thickness of your tie). Only move the active (wide) end.

2. Wide end over the small end to the left.

3. Up into the neck loop from underneath.

4. Down to the left.

5. Around the back of the small end to the right.

6. Up to the center, towards neck loop.

7. Through the neck loop and down to the right.

8. Across the front to the left.

9. Up into the neck loop from underneath.

10. Down through the loop you've just created in the front.

11. Tighten the knot by pulling down on the wide end. Slide the knot up & adjust.

4 Different Ways To Tie A Tie 👔
22 Opinion