Hello everyone! Welcome to Craft time.
Today I am going to show you how to make your own chalkboard!
What you will need:
Plywood
Chalkboard spray paint or paint
Sandpaper
Painters tape and news paper. Trust me on this one lol.
Step 1:
Sand the edges of the plywood board so you will be free of splinters
Step 2:
Lay the plywood down on the paper or plastic to avoid getting paint all over
Step 3:
Open the can of spray paint and shake for 2 minutes until you hear the ball inside rattle
Step 4:
Spray a coat over the board.
Step 5: let it dry for 15 minutes
Step 6: apply a second coat
Step 7: allow 3 hours to completely dry and 24 hours before initial use.
You can buy plywood at Lowe's or Home Depot. I recommend a 2 foot by 1 ft board.
The spray paint can also be bought at walmart, lowes or most hardware stores. The same with sandpaper.
Make sure also to do this outside in a well ventilated area.
I hope you enjoyed Craft time!
Most Helpful Opinions